M1.1 specifics

Macchina 1.1 is our first revision. The goal for this board was to improve and fix the issues we found on the previous 1.0 version.

These changes from 1.0 are as follows:

  1. ISO interface now has option to connect to hardware UART pins on ATmega2560 through solder jumper SJ2, SJ3, SJ4, SJ5
  2. Termination jumpers are now shunt-type with 0.1" spacing.
  3. SPI header (ISCP1) now in the same spot as Arduino MEGA, improving shield compatibility and removing need for SPI re-routing solder jumpers from M1.0
  4. USB connector (CON1) now has thru-hole legs for better durability
  5. Dual terminal block combined into one 8 pin connector (CON2)

New additions/changes to board:

  1. CANbus isolation option added, including isolated power supply

Known issues/changes, all of which WILL BE addressed in M1.2 update:

  1. ISO interface circuitry inverts logic. ATmega2560 does not have straight-forward way to invert logic, so a hardware change is needed. Hand-modification performed to rectify this. See this page for more information on this modification.
  2. Remove isolation option: adds unneeded to cost/complexity of board. Use external isolation solution if needed
  3. TBD: testing in progress.

Comments

Submitted by meoowu77 on Fri, 10/02/2026 - 09:08

Cultural connections are an important part of the identity of this resort because it is owned and operated by the Tsuut’ina Nation. The property combines modern hospitality facilities with references to Indigenous heritage, including dining options influenced by local traditions. People researching the destination can also visit Grey Eagle Casino as part of their wider search for information. Along with its entertainment facilities, the resort has a hotel, restaurants, meeting spaces, and an event centre. Exploring these different elements can give visitors a better understanding of what the location offers before they arrive.

Pages