cart

Your shopping cart is empty.
24-pin connector and wires

This is a an extra bag of wires and a 24-pin connector. The 24 pin connector is ONLY used on the Under-the-Hood version of M2.

ESTIMATED SHIPPING: 2-3 days
$4.00
26-pin connector and wires



This is an extra bag of wires and a 26-pin connector. The 26 pin connector can be used with EITHER the Under-the-Hood or Under-the-Dash version of M2. Plugs into the "Expansion" connector.

ESTIMATED SHIPPING: 2-3 days
$4.00
Breakout Board



This is a breakout board. Use it to connect an Interface Board to something else - RPi, Edison, or other favorite microcontroller.

ESTIMATED SHIPPING: 2-3 days
$5.00
The Car Hacker's handbook



Everything the novice needs to get started with M2. Do it all with the help of Craig Smith's Car Hacker's Handbook. This book gives an in-depth introduction to reverse engineering and other car hacking techniques.

ESTIMATED SHIPPING: 2-3 days
Only ships to US
$35.00
Interface Board (UTH)



A great option for more advanced DIYers with their own microcontroller. This is the Interface board of the M2 Release Hardware and is the culmination of thousands of hours of work. Use it with your Edison, ST Dev board, RPi, or favorite microcontroller using the Breakout board. This is the Under-the-Hood version with a basic 24 pin connector and the same product as the "M2 Interface ONLY" Kickstarter reward level.

ESTIMATED SHIPPING: 2-3 days
$50.00
Interface board (UTD)



A great option for more advanced DIYers with their own microcontroller. This is the Interface board of the M2 Release Hardware and is the culmination of thousands of hours of work. Use it with your Edison, ST Dev board, RPi, or favorite microcontroller using the Breakout board. This is the Under-the-Dash version with an OBD2 connector and the same product as the "M2 Interface ONLY" Kickstarter reward level.

ESTIMATED SHIPPING: 2-3 days
$50.00
Processor Board



This is the final version of M2 Hardware and is the culmination of thousands of hours of work. This is just the processor board found in both the Under-the-Dash and Under-the-Hood version.

ESTIMATED SHIPPING: 2-3 days
$50.00
M2 (Under-the-Hood)



This is the final version of M2 Hardware and is the culmination of thousands of hours of work. This is the Under-the-Hood version with a basic 24 pin connector and the same product as the "M2" Kickstarter reward level.

ESTIMATED SHIPPING: 2-3 days
$89.00
M2 (Under-the-Dash)



This is the final version of M2 Hardware and is the culmination of thousands of hours of work. This is the Under-the-Dash version with an OBD2 connector and the same product as the "M2" Kickstarter reward level.

ESTIMATED SHIPPING: 2-3 days
$89.00